biopac

Ultimately we will need to download and install a number of drivers and programs. The EQMOD ASCOM HEQ5/6 is the correct choice as this relates to my mount and the.

Hi, I have just downloaded the PHD autoguide program and am trying to get it to talk to my HEQ5 PRO mount. I have downloaded the ASCOM platorm. My PC runs on Windows XP.

I connected my PC to the mount via a serial to ST-4 adaptor connected to my COM2 port. I did a bit of research and found that the Celestron driver could be used to talk to my HEQ5 mount. I set up the driver properties to select the Synta Synscan setting. I tried to connect to the mount in PHD and got an error message 'Scope does not support pulse guiding'. Does anyone have any advice on how to get my system to talk to the HEQ5 mount????? Everybody, Just some context here. I have a 180mm Skywatcher Mak-Cassegrain and a Meade DSI-II imager.

I am about to buy a guide scope and another imager for guiding (probably a QHY5). Style Yamaha Psr S770 Terbaru Gratis. My plan is to guide the telescope using PHD and to image using the Meade software. Before I purchase the guide scope, I wanted to make sure that I could get my mount and PHD communicating.

I wasn't planning to use a planetarium program to control the guiding sessions, instead pointing to the target using the Synscan hand controller and establishing autoguiding. I am confused about the comments on connecting through the Synscan hand controller?? I am also confused about the comment about connecting to the port on the motor driver not working. Serial Number Ae Cc 2015. Is there anymore detail here to help me understand this?? Sounds like my proposed setup is not sensible?????

Advice would be highly appreciated, including some sort of common sense, simple summary somewhere on how to setup autoguiding. Download Mp3 Songs Of Paap Ki Duniya. My proposed set-up above seems similar to something I read on the shoestring astronomy website. Hi, I have the same set up as you and here is what I do. Well kind of the same set up. I use my dsi2 for guiding and a dslr for taking the pictures.

First off, go here and down the eq mod driver. If you dont already have one you'll need to get a usb to serial convertor. They are much ceaper than the shoe string adaptors but they do require the synscan controller. If your laptop already had a serialport on it then your set. With the mount you should have gotten a serial to rj12 connector lead. The rj12 looks like the end of a telephone cable. The rj12 connector plugs into the synscan control box and the serial into the pc.

If you go into utilities on the synscan and select PC DIRECT MODE you scope should be ready to talk to the pc. Next open PHD, and click on the camera tab and select the dsi. It should show as connected on the bottom of the screen under the buttons. Next click on the telescope button, and select eqmod from the list, a box will apear click on properties and set the baud rate to 9600 and enter the port number of the serial device that you are using.